In internal combustion engines, turbochargers or boost turbine are very important devices to increase engine efficiency and help the engine start easily. So what is a turbocharger? What is the maintenance of the turbine repair? What is Origin Pipe's service for turbocharger maintenance and repair

  Firstly, turbochargers simply understand how to utilize the exhaust flow of engine to rotate the turbine wheel transmit to rotate compressor wheel to increase the intake of air into the engine, thereby increasing fuel combustion efficiency and increasing the engine power can be up to 300% of the engine capacity without turbines and is also an easy starter engine. So, there are two types of repair of turbocharger, which are to repair the instantaneous trouble occurring during the operation of the turbocharge, such as the sound of the turbo, the strange sound, vibration imbalance, etc., and the periodic repair of the turbo's running hours. or hours of running an engine include big overhaul, overhaul, and small overhaul. Because the speed of the turbine is very high, it can reach 97,000 rpm, the repair requires skilled workers to be very careful and skillful, otherwise, it will damage the turbo blades falling into the cylinder, thereby destroying the engine. causing very serious damage.

  Below is the basic procedure for periodically turbo repair:

• Remove, clean, carefully check the internal details of the turbine such as bearings, turbine blades, wheel ring, turbine shaft by the manufacturer on running hours such as 8,000h; 12,000h; 16,000h; 20,000h; 24,000h...
• Report results of measurement inspection before repairing
• Repair replacement or restoration of damaged equipment
• Clean the turbo blades by sandblasting to remove the coal dust from the blades
• Balancing of turbine shaft
• Replace the kit, necessary parts
• Complete installation of turbines
• Test run and hand over to customers
• Make a complete repair report sent to the customer and internal storage

  Origin Pipe, our company with a team of highly trained engineers in the internal combustion engine industry as well as turbochargers or gas turbines, will provide turbocharger maintenance and repair service of ABB, KBB, Napier. , MET .. at the site such as on ships, rigs, power plants.   Especially, we have 6 months warranty for our service and at the same time, we are very experienced in repairing ABB turbines which account for the majority of turbines on ship and drilling rigs such as VTR, TPS, TPL...

  Besides, we provide spare parts for popular turbines such as ABB, KBB, Napier, MET with the best cost but still quality assurance.